For the body to work well, it must have enough oxygen transported in the blood. Doctors need to know the amount of oxygen in the body. The CMS pulse Oximeters are the equipment used at the hospital to measure oxygen concentration in the blood. This is compared to the average amount in the body that translates to 95 to 98 percent in a healthy individual free from pulmonary and other diseases. When used, it is attached to any narrow part of the body or your finger.
This equipment is used because it does not intrude on the way the body works. When compared to withdrawing blood from the body to do tastes on the amount of O2 and hemoglobin, it is better. If a person is to be tested after a few hours, the method of drawing blood becomes inconvenient. Taking blood from a patient within short intervals is not recommended.
The oximeter is usually linked to the multi-parameter patient observer. This has a large display and can be easily seen from distance. To check ones blood, one end of the oximeter is hooked to the patients finger and the other end will be the one to send readings to the huge screen where they will be clearly displayed.
This machine is used to test the amount of O2 in a persons blood. However, you have to know that it cannot be used to show details whether a person is using oxygen. To show whether the patient is using 02 in the body, this machine must be connected to other devices that perform this function. It is ideal because patients who are on surgeries need something to show the oxygen. In most cases, they have unstable supply that doctors need to improve on their intake.
People who have COPD and sleep disorders like apnea and hypopnea are closely monitored using this instrument. This is because they may start hyper or hypo ventilating, and this may not be sensed easily if they are in critical condition. The oximeter is a must have in emergency medicine because it does in seconds what would take hours to be determined.
Pilots who operate in great heights that exceed 10000 ft and where supplemental oxygen may be required also need to have their own oximeters. These can be used to monitor when they are not receiving enough air, and other emergency ensures can be taken. This way it is used to save lives. The CMS oximeters have low power consumption, and so they can work continuously for more than 30 hours.
This instrument can be attached to any finger. This can be adults and children. This medical equipment has been tested by Health Canada and FDA for use in emergencies. It shows details in its 7 bar graph system. This display can be seen in ambient light.
The CMS pulse oximeter has a small and lightweight digital led display that is not too tiring to the patient and it is also very economical on power consumption. It automatically indicates when it is on low power and so one will not need to worry about disconnecting it for a time.
This equipment is used because it does not intrude on the way the body works. When compared to withdrawing blood from the body to do tastes on the amount of O2 and hemoglobin, it is better. If a person is to be tested after a few hours, the method of drawing blood becomes inconvenient. Taking blood from a patient within short intervals is not recommended.
The oximeter is usually linked to the multi-parameter patient observer. This has a large display and can be easily seen from distance. To check ones blood, one end of the oximeter is hooked to the patients finger and the other end will be the one to send readings to the huge screen where they will be clearly displayed.
This machine is used to test the amount of O2 in a persons blood. However, you have to know that it cannot be used to show details whether a person is using oxygen. To show whether the patient is using 02 in the body, this machine must be connected to other devices that perform this function. It is ideal because patients who are on surgeries need something to show the oxygen. In most cases, they have unstable supply that doctors need to improve on their intake.
People who have COPD and sleep disorders like apnea and hypopnea are closely monitored using this instrument. This is because they may start hyper or hypo ventilating, and this may not be sensed easily if they are in critical condition. The oximeter is a must have in emergency medicine because it does in seconds what would take hours to be determined.
Pilots who operate in great heights that exceed 10000 ft and where supplemental oxygen may be required also need to have their own oximeters. These can be used to monitor when they are not receiving enough air, and other emergency ensures can be taken. This way it is used to save lives. The CMS oximeters have low power consumption, and so they can work continuously for more than 30 hours.
This instrument can be attached to any finger. This can be adults and children. This medical equipment has been tested by Health Canada and FDA for use in emergencies. It shows details in its 7 bar graph system. This display can be seen in ambient light.
The CMS pulse oximeter has a small and lightweight digital led display that is not too tiring to the patient and it is also very economical on power consumption. It automatically indicates when it is on low power and so one will not need to worry about disconnecting it for a time.
Aucun commentaire:
Enregistrer un commentaire